Browse Our Safety Categories:

Read Our Latest Blogs:

Safety Tip of the Week:

An eye wash station is necessary in all industries that handle chemicals and hazardous materials.  The temperature of the flushing fluid is just as important outdoors as indoors.  Most are concerned about the temperature in the winter going below 60 degrees and not being ANSI compliant, but another concern is the flushing fluid exceeding 100 degrees.  This can happen in industrial areas without air conditioning and outdoors where sun  exposure heats the water to uncomfortable levels.  When installing an eye wash station, take into consideration all seasons and climate changes.

Kidde 900-0076 AC Powered Plug-In Carbon Monoxide Alarm

Price: $79.50
  • SKU: 900-0076
  • Weight: 1.00 lbs
The Kidde 900-0076 AC powered, plug-in carbon monoxide alarm utilizes unmatched sensor technology for protection from the dangers of CO. This carbon monoxide Alarm includes a 9V battery backup that provides continuous monitoring of CO levels, even during power outages, when AC-only units are not providing protection.  The 900-0076 is able to detect and store measured data of concentrated CO levels as low as 11 and up to 999 PPM with its peak level memory display. You have several mounting options with this unit, including: direct-plug, a 6’ power cord or table top.  The Kidde 900-0076 AC powered, plug in carbon monoxide alarm provides you and your family with a warning signal to protect against dangerous levels of carbon monoxide in your home. It is easy to install in any of your AC wall outlets. The digital display feature allows for easy viewing of carbon monoxide levels from 30-999PPM (parts per million). This alarm is UL listed. It offers a 5 year limited warranty

   • Digital Display
– Displays the level of carbon monoxide the unit is sensing.
        The unit updates this reading every 15 seconds.
     • Peak Level Button – Displays the peak CO level recorded by the alarm
        since it was last reset or unplugged.
     • 9V Battery Back-up – Provides protection during power outage.
     • Test Button Functions
       – Tests the unit for proper operation
       – Resets the Carbon Monoxide alarm
     • LED Operation
       – Blinking dot in lower right corner of display denotes
          normal operation
       – Digital readout displays CO concentration in parts
          per million (30-900PPM)
In alarm condition you will hear 4 quick beeps, 5 seconds off, repeat.
Customer Reviews
# of Ratings: 0
There are no comments for this product.
Copyright © 2014. All Rights Reserved
  • Connect With Us: