Browse Our Safety Categories:

Read Our Latest Blogs:

Safety Tip of the Week:

An eye wash station is necessary in all industries that handle chemicals and hazardous materials.  The temperature of the flushing fluid is just as important outdoors as indoors.  Most are concerned about the temperature in the winter going below 60 degrees and not being ANSI compliant, but another concern is the flushing fluid exceeding 100 degrees.  This can happen in industrial areas without air conditioning and outdoors where sun  exposure heats the water to uncomfortable levels.  When installing an eye wash station, take into consideration all seasons and climate changes.

Speakman SE-4330 Heated GravityFlo Portable Eyewash Station

Regular Price: $1,970.00
On Sale For: $1,280.50
  • SKU: SE-4330
  • Weight: 30.00 lbs
  • Width: 32 in
  • Height: 26 in
  • Depth: 19 in
Free Shipping!
Speakman SE-4330 is a heated self-contained GravityFlo portable eyewash station and features an insulated jacket with heater for areas where tepid water is needed when temperatures go down to -10ºF.  This eyewash station supplies a continuous flow of water for a minimum period of 15 minutes.  The Speakman SE-4330 has a 20 gallon tank and provides a longer run time than the 15 minute ANSI Z358.1 requirement.  Activation takes one pull on the strap for hands-free operation.  Its integral drain allows the flushing fluids to be contained to avoid slip hazards when deployed.  Can be mounted on a shelf or wall (bracket included).  Non-heated models include the standard Speakman SE-4300 which includes the side fitting drench hose.  Includes an integral eyewash sign.

  • 20 gallon capacity tank, high density molded polyethylene
  • Water-resistant insulating jacket with Zipper for ease of assembly and access
  • LCD temperature readout
  • Provides tepid water to flush the eyes
  • Keeps water tepid down to ambient temperatures of -10°F (-23°C)
  • Heater: 120VAC/3 amps; 200 W heating pads
  • Includes ground fault plug with reset
  • Molded plastic spray outlets
  • Elastomeric pull strap activator
  • Shelf or wall mount (metal bracket included)
  • Plastic fill cap with integral tamper prevention
  • Integral basin drain with 3/4 in. GHT male fitting
  • Eyewash sign integral to jacket graphics
  • Unit exceeds the minimum 0.4 gpm for 15 minutes as stated by ANSI/ISEA Standard

Customer Reviews
# of Ratings: 0
There are no comments for this product.
Customers Who Bought This Product Also Bought
Copyright © 2014. All Rights Reserved
  • Connect With Us: