Kidde 21032138 2.5 lb ABC Fire Extinguisher – 1A:10B:C Rated with Vehicle Bracket

Kidde 21032138 PRO 110 Rechargeable ABC Fire Extinguisher

The Kidde 21032138 PRO-2.5MP-1 is a rechargeable multipurpose fire extinguisher designed for common Class A, B and C fire hazards. This configuration includes a Kidde 466401 strap-retention bracket that securely holds the extinguisher in vehicles, work trucks, mobile equipment and qualifying marine installations.

The extinguisher combines a 2.5 lb dry chemical agent capacity with a lightweight seamless aluminum cylinder, durable aluminum valve assembly and an approximate discharge range of 10 to 15 feet. Its rechargeable construction allows continued service following required professional inspection, maintenance and recharging.

Key Features & Benefits

• UL rated 1-A:10-B:C for common Class A, B and C fire hazards
• Rechargeable construction provides an extendable service life when properly maintained
• Contains approximately 2.5 lb of multipurpose dry chemical agent
• Provides an approximate discharge range of 10 to 15 feet
• Approximately 10-second discharge time
• Easy-to-read pressure gauge provides at-a-glance operating status
• Clear graphic instruction label displays the basic operating steps
• Easy-pull safety pin helps prevent accidental operation
• Lightweight seamless aluminum cylinder
• Durable aluminum valve, handle and lever assembly
• Includes Kidde 466401 strap-retention bracket for secure mounting
• Included bracket is identified by Kidde as USCG approved
• QR code supports product identification, inspection and service record management

Kidde 21032138 Specifications

Understanding the 1-A:10-B:C Rating

The UL rating identifies the types and relative sizes of fires the extinguisher is designed to handle. The Kidde 21032138 is intended for small, early-stage fires when conditions remain safe enough to attempt extinguishment.

• Class A: Wood, paper, cloth, textiles and similar ordinary combustible materials
• Class B: Flammable liquids and gases
• Class C: Fires involving energized electrical equipment

Where Is the Kidde 21032138 Best Used?

• Service trucks and utility vehicles
• Work vans and fleet vehicles
• Construction and maintenance vehicles
• Mobile equipment
• Garages and workshops
• Warehouses and light industrial locations
• Boats and marine installations where this rating and bracket are appropriate
• Emergency-response and roadside-service vehicles

Is the Kidde 21032138 Right for Your Application?

Choose the 21032138 when you need a compact, rechargeable ABC extinguisher with a strap-retention bracket for a vehicle, mobile-equipment or marine installation. The bracket helps keep the extinguisher secured while allowing it to remain accessible during an emergency.

For a fixed indoor wall location, the Kidde 21032136 provides the same extinguisher with a wall hanger instead. Larger vehicles, higher-hazard areas and regulated occupancies may require a larger extinguisher or a different UL rating based on the applicable fire code.

Kidde 21032138 vs. Kidde 21032136

Both ordering numbers use the same rechargeable PRO-2.5MP-1 extinguisher. The principal difference is the included mounting hardware: the 21032138 includes the 466401 strap bracket, while the 21032136 includes the 340357 wall hanger.

Installation, Inspection and Maintenance

Install the extinguisher and bracket in accordance with Kidde's instructions and all requirements applicable to the vehicle, vessel or facility. The extinguisher must remain securely mounted, readily accessible and protected against damage.

• Secure the bracket to a structurally suitable mounting surface
• Confirm that the retaining strap properly holds the extinguisher
• Keep the extinguisher visible and accessible without creating an obstruction
• Verify that the pressure-gauge needle remains within the operable range
• Check that the safety pin and tamper seal remain intact
• Inspect the cylinder, valve, nozzle and bracket for damage or corrosion
• Arrange for required maintenance through a qualified fire-equipment service provider
• Have the extinguisher professionally serviced after any discharge

Frequently Asked Questions

Is the Kidde 21032138 rechargeable?

Yes. The PRO-2.5MP-1 is rechargeable and can be inspected, maintained and recharged by a qualified fire-equipment service provider.

What mounting bracket is included?

The 21032138 includes the Kidde 466401 strap-retention bracket for secure vehicle, mobile-equipment or qualifying marine installation.

Is the included bracket USCG approved?

Yes. Kidde identifies the included strap-retention bracket as USCG approved. The complete installation must still satisfy the requirements applicable to the particular vessel.

Can the 21032138 be mounted in a work truck?

Yes, provided the bracket is securely attached to a suitable surface and the location satisfies applicable vehicle, workplace and fire-safety requirements.

What is the difference between the 21032138 and 21032136?

The extinguisher is the same PRO-2.5MP-1 model. The 21032138 includes the 466401 strap bracket, while the 21032136 includes the 340357 wall hanger.

What types of fires can it handle?

Its 1-A:10-B:C rating covers ordinary combustible materials, flammable liquids and fires involving energized electrical equipment.

How far does the extinguisher discharge?

The approximate discharge range is 10 to 15 feet, with an approximate discharge time of 10 seconds.