Browse Our Safety Categories:

Read Our Latest Blogs:

Safety Tip of the Week:

Week of October 14, 2019

Hydration and Electrolyte Replacement in the Winter

Hydration is just as important in the winter as it is in the summer.  Realizing that you are dehydrated when it is cold outside is more of a challenge.  We perspire underneath the layers of clothing that keep us warm in the winter.  Perspiration is absorbed by our clothing and we think we sweat only when it is hot outside.  That is so far from the truth!  When in an industrial setting in the winter months we need to be more aware of hydration.  We tend to drink less and dehydration is less obvious.  We are more prone to accidents in the workplace while operating machinery or working at a job site when we are dehydrated.  Be aware of this possibility and remember that the temperature outside is not as important as the temperature inside of your body.  To combat dehydration, look at the All Natural Sword Electrolyte Replacement products here! 

Crews Headgear and Faceshields

Crews Aluminum Bracket For Faceshield

Price: $6.59
Aluminum Bracket For Faceshield
  • SKU: 102C
  • Weight: 2.50 lbs

Crews Ratchet Take-Up Headgear

Price: $8.99
  • SKU: 103C
  • Weight: 1.50 lbs

Faceshield 10" x 20"

Price: $3.99
.040 thick PETG
  • SKU: 102040C
  • Weight: 3.00 lbs

Faceshield 8" x 15-1/2"

Price: $2.89
.040 thick Polycarbonate
  • SKU: 181540C
  • Weight: 3.00 lbs

Faceshield 8" x 15-1/2"

Price: $2.19
.040 thick PETG
  • SKU: 181640C
  • Weight: 3.00 lbs
These high quality and economical protective headgear, faceshields and brackets meet all ANSI Z87.1+ Safety Standards.  Headgear bracket accepts most manufacturers' hard hats.  Crews headgear has locking cams which eliminate snaps and lower replacement costs.  Face shield windows are shown separately below.  
Headgear Bracket 102C (Picture #1 shown with faceshield)
     • Aluminum Material
     • 5 system cam lock for added impack resistance
     • 102 Bracket accepts most manufacturers’ hard hat and universally punched windows
     • Meets or Exceeds ANSI Z87.1-1989 Safety Standard
Headgear 103C (Picture #2 shown with faceshield)
     • ABS Material: Plastic Resin forms shell for the headgear
     • Crown is made of nylon 66
     • 4 inch sparkguard made from HDPE Plastic
     • Large ratchet handle is easy to adjust, even with gloves, for optimum fit
     • Large cotton sweatband for better fit, durability, and washable
     • 5 system cam lock for added impact resistence
     • 103 Headgear accepts most manufacturer’s universally punched windows
     • Adjust headbands accommodate hat sizes from 6 1/2 to 7 3/4
       (head measurements from 20.5” to 24.3/8”)
     • Meets or Exceeds ANSI Z87.1+ Safety Standard
Faceshields (clear only)
     • 5 system hole punched, designed to fit Crews Headgear. Accepts most
       manufacturers’ cam lock headgear
     • Material: Polycarbonate
            8” x 15.5”, .040 thick, item number: 181540           
     • Material: PETG (PETG is a thermoplastic polyester that provides excellent
         toughness, chemical resistance and is easy to thermoform. PETG fabricates
         well using processes like die cutting, drilling, routing, bending and polishing.)
           8” x 15.5”, .040 thick, item number:181640
          10” x 15.5”, .040 thick, item number:101640
          10” x 20”, .040 thick, item number: 102040
     • Material: PETG with Aluminum Bound
           8” x 15.5”, .040 thick, item number: 181640A
* Meets or Exceeds ANSI Z87.1+ Safety Standard
**Note** Headgear is to be used as secondary protection only 
Customer Reviews
# of Ratings: 0
There are no comments for this product.
Copyright © 2014. All Rights Reserved
  • Connect With Us: