The new Kidde 0910 is a 10-year, sealed battery, ionization, smoke alarm with Alarm Memory and Smart Hush™ feature. The innovative design of this smoke alarm’s automatic activation is unlike any other smoke alarm. The 0910 smoke alarm will automatically activate when it is attached to the mounting bracket; there are no pull-tabs, no switches, everything is automatic. At the end of the smoke alarm life, the unit will chirp, indicating the smoke alarm is in need of replacement.  The customer can use a simple tool such as a screwdriver to deactivate the unit, stopping the low battery chirp and making it safe for disposal.  The sealed-in board-mounted batteries will power the 0910 unit for its complete 10-year life. No replacement batteries will ever be needed.

The Kidde 0910 sealed battery operated smoke alarm features a self-activation mechanism making installation simple and easy. It also features Smart Hush™ Control allowing consumers to temporarily silence nuisance smoke alarms and an End of Life Alert indicating it is time to replace the smoke alarm.  At the end of the smoke alarm’s 10-year life, deactivation of the alarm is just as easy. Using a tool such as a small screwdriver, a deactivation switch removes power from the smoke alarm and renders the batteries safe for disposal. The smoke alarm lockout feature mechanically prevents a deactivated unit from being mounted back on the mounting bracket.   

     • Sealed-In Lithium Battery: Sealed-in lithium power supply; no battery replacement

        required over the 10 year life of the alarm. Eliminates worry about battery removal

        or unauthorized deactivation of alarm.

     • Self Activation: Alarm automatically activates when attached to the mounting bracket.

     • Alarm Memory: Rapidly flashing LED alerts user if the alarm has sounded since the

        last time the test/reset button was used.

     • Smart Hush™: Will temporarily silence nuisance smoke alarms and will not allow hush mode

        to be activated unless the unit is in alarm mode.

     • Test/Reset Button: Tests unit’s circuit operation and resets memory after an alarm

        condition occurs.

     • End of Life Warning: Smoke alarm chirps every 30-45 seconds indicating the alarm is in need

       of replacement.

     •Tamper Resist: (when activated upon installation) effective in preventing someone

       from removing the unit from the mounting bracket.

     • LED: A flashing red indicator light with four modes of operation: standby, alarm mode,

       hush mode, and memory set.