3M Qualitative Fit Test Kit is a sweet respirator fit test to test the seal of a respirator against a person's face.  3M's Fit Test Kits may be used with any particulate respirator of any brand and also used with vapor and gas respirators with particulate filters.  3M Fit Test Kits ensure an initial good fit for respiratory protection and contributes to the reduction of poor fit.  3M Fit Test Kits are designed to fit test any negative-pressure respirator such as any 3M Disposable and Reusable Respirators.  When introducing  new respiratory equipment, and initial fit test is conducted and then repeated at a later date to ensure the proper fit.  Fit test is easy to use simply by spraying the sweet solution into the hood environment and if a seet taste is not detected, it is an acceptable fit.

Contents:

• Sensitivity Solution FT-11
• Fit Test Solution FT-12
• 2 Nebulisers FT-13
• Hood FT-14
• Collar Assembly FT-15
• 2 Sets Replacement Nebuliser Inserts
• Laminated Instruction Booklet

Quantity:  

The Advantage 200 LS respirator is approved by the National Institute for Occupational Safety and Health (NIOSH) for use against a variety of respiratory hazards.  Upon inhalation, the air stream flows through the cartridges, which remove contaminants, so the wearer breathes in clean, fresh air.  Designed for easy installation, Advantage cartridges use the latest bayonet-style mounting design. Featuring a low lug height and lead-in connectors, the cartridges lock into place with a single twist. An advanced engineering design makes negative pressure fit-testing easier to perform.

Offers unmatched fit and comfort with a clear blue facepiece. The thermoplastic rubber subtracts 25% of the weight and adds softness to MSA's Advantage 200 LS respirator. The patented MultiFlex® System equalizes pressure on the face-seal area, while delivering exceptional stability, so the respirator will not collapse during wear. The AnthroCurve sealing surface instantly conforms to each wearer’s unique facial characteristics. Current Advantage 200 respirator wearers require no additional fit testing.  In addition, filter cartridges protect against dusts, particles and mists. Chemical cartridges protect against gases and vapors. Combination cartridges deliver protection from both particulate and gaseous contaminants. All cartridges are interchangeable between the Advantage 200 and 1000 respirators and are color-coded. Most are incinerable.

 

Quantity:  

Moldex Fit Test Kit contains all of the contents necessary to conduct a qualitative fit test for disposable and reusable respirators. OSHA requires that anyone who wears a respirator needs to be fit tested beforehand.  The Moldex Bitrex Fit Test Kit meets the requirements established by OSHA 1910.134.  Bitrex has a bitter taste that indicates breakthrough in respirator fit. Includes: fit test hood, threshold screening and fit test solution, nebulizers and step-by-step instructions.

 

Click here on instructions on:   How To Do A Qualitative Fit Test

Quantity:  

Quantity:  

Quantity: